Orthopedic penis enlargement devices have been used by men for more than ten years and have proven to be positive. The most widely used device is called extender, which is translated from English as expander or filler. This fully reflects its purpose. It is characterized by ease of design and assembly, which allows men to use both purchased (factory) and homemade extenders. It is quite easy to do. The main thing is to have the necessary materials and a basic knowledge of the mechanics of the intimate apparatus.
Types and effects of extenders
The device functions on the principle of reproduction of cavernous bodies. This happens under conditions of regular tissue tension, due to the periodic twisting of the axes in the direction of increasing length. The growth of new tissues does not stop;
Average growth rates, according to user and manufacturer reviews, are an increase of 2-5 centimeters in length over a period of 6 to 10 months. You should not expect instant results. It will take patience and regular use of the extender. Violation of this recommendation will result in not achieving the desired effect.
Depending on the method of attachment, extenders are divided into several types. When planning to assemble a home version, you need to understand how they differ from each other.
Vacuum expander
The circuit is performed using a special vacuum chamber. It covers the head of the penis with a circumference of about 3-7 centimeters. It is considered the most reliable and safe. The risk of injury is reduced to virtually zero as there is no risk of compression.
Extender for penis enlargement
Loop and strap extender
The attachment mechanism is almost the same, but the attachment form is different. In the first case, a loop is used, and in the second - a strap. The difference gives these species a significant difference.
The strap is lined with gauze, so the degree of compression is minimal. The loop, on the contrary, can compress itself strongly, disrupting the blood supply to the reproductive organ, but remains the most common option.
How to make an extender with your own hands at home?
You can make any of the three types of devices listed. The most difficult to make would be the vacuum, because you would have to make a chamber. Otherwise, the process will not have significant differences.
pictures
Make a schematic diagram of the device yourself. To make a drawing, it is enough to study the design of any well-known manufacturer. Based on the photo, drawing, video, they draw their sketch. The length of the side columns is selected according to the desired result. It can vary from 20 to 25 centimeters.
Necessary materials and tools
A home-made extension is assembled from the same parts as a factory one. Specific materials depend on what kind of structure is assembled:
- The stop ring, straps and loops are in direct contact with the skin and should not cause an allergic reaction. This imposes certain requirements on the material. The seal can be made of thick cardboard, hypoallergenic plastic/plastic without sharp corners. Its inner diameter should be 2-3 mm larger than the width of the cross section of the penis. Before use, it is better to use a sterile bandage, which is changed every time.
- The slats (side bars) are selected so that they can fix the required length for a long time. It can be mares, rods, chrome spokes.
- The vacuum chamber and lamp must be sealed. If this condition is not met, then such a homemade product will not work.
The difference between the devices lies in the fastening element. If you decide to make a variety with a camera, you should give preference not to a plastic bottle, as it is written in some sources, but to purchase a special jar. These are sold in pharmacies. This ensures the creation of an internal vacuum.
Schematic manual extension
Step-by-step assembly instructions
Making a bracelet or loop device involves performing the following sequence of work:
- A piece with a diameter of 11 cm is cut from plywood or other material, the thickness of which does not exceed 5. 5 cm.
- The length of the stems is 20-30 cm. The entrances are filled with glue.
- They put a "lamb" on each one.
- Strips are cut from a thin metal plate and holes are made.
- A clamp made of soft tubing or strap is inserted into the holes, which can be used as wide medical tourniquets.
- Check the reliability of the fixation.
The assembly of the vacuum variety differs only in that the pear can is attached at the end. Not everyone has such a device at home, but it is freely sold in city pharmacies. The radius varies from 13 to 25 mm. It is selected according to the size of the reproductive organ. The tightness of the clamp is ensured by means of a rubber sleeve. Its length should be at least 6 cm. It can be made from elastic surgical gloves.
Air will be pumped out thanks to the bulb or hose connector. You can use the tonometer element. The shut-off valve is opened from it and inserted from the other end. This allows you to change the principle of operation. The pear will begin to pump rather than pump out air. As you can see, you'll have to do a lot more sorting than a strap and loop device.
To understand the principle of assembling an extension with your own hands at home, a video will help you, which clearly shows how the elements are connected, as well as what material they are made of.
Extender for penis enlargement - tied under the knee
How and when to use it?
Indication for use of the device is the small size of the device (10-12 cm). This length is not a "reference" length. A man decides for himself if he is satisfied with his reproductive organ or if he wants more. To increase the size of the phallus, it is necessary to wear a home-made or factory-made device for at least 4-6 hours a day. The design allows you to hide the extension under clothing. People around will not notice anything.
Instructions for using the stretcher:
- The circle is placed on the slightly erect penis. The ring should fit snugly around the pubic bone.
- The forelimb is opened and a camera, loop, or strap is attached to the scrotum. It is necessary to make sure that blood circulation is not disturbed (there is no excessive pressure, changes in the shade of the whole part).
- Adjust the length of the rods. It should not be painful. The parameter gradually increases, which allows the organ to get used to the degree of tension, that is, the phallus is trained.
If possible, massage the penis hourly. This allows it to quickly adapt to loads. After the allotted time, the device is removed and the meat is massaged using special intimate creams. The device is thoroughly disinfected each time and stored in a clean package.
Advantages and disadvantages of homemade structures
The advantages of a home stretcher include the following parameters:
- the possibility of testing the stretcher without purchasing the device;
- relatively cheap;
- Adopting a design that fully conforms to the parameters of the phallus.
There are actually very few advantages. There are more downsides. This includes the inconvenience of the product, because it is quite difficult to assemble a model on your own that will perfectly spin, put on, fly, and will not press or slip anywhere.
Which extender is better - factory or homemade?
To answer this question, it is enough to compare two types of models:
- Homemade products weigh much more than factory models. This leads to the need to adjust the rods for a long time each time so that they do not compress the head of the penis. Another point is that making a vacuum model is quite difficult. By the way, it's usually less effective than a homemade loop and strap.
- A value that has been named an advantage is a comparative advantage. Today there are Chinese models, they cost 1-3 thousand rubles. It is not more expensive than a homemade extension. No one will sell half a meter of hair clip or 20 centimeters of textolite. You will have to buy a lot more material that will remain idle. This makes DIY assembly worthwhile only when you already have everything you need.
- The simplified design of the self-assembled device is not an advantage, but a disadvantage, because it will be inconvenient to use. You have to spend a lot of time on getting dressed and taking off, and taking into account that self-massage is recommended periodically, it is also less effective.
One conclusion can be drawn - factory equipment is better. To try this method of penis enlargement, you can simply buy a cheap model
What are the risks of using a homemade device?
Experts and experts do not recommend assembling the extension with your own hands without the appropriate skills. If the device turns out to be "awkward", pressure, pressure, causes discomfort, it is not recommended to wear it. This can lead to unpleasant consequences.
Homemade extender
A well-assembled device is not inferior in efficiency to the factory one. It will only be aesthetically unattractive. Otherwise, there will be no difference, but there is also a nuance here. Many users write that hematomas, contractions and irritation occur on the dermis during long-term use.
This may be due to low quality materials. It is almost impossible to find medical silicone in a pharmacy. If it is sold, its properties leave much to be desired, and negative consequences begin with prolonged contact.